SUS Products

Stainless Steels Cd-Ne-Mn Series 200 Series Ne-Cd Series 300 Series 600 Series
Cd Series 400 Series Low Series 500 Series
Product Application 1
  • 主要應用於高精密超薄金屬電子材料
  • Industrial computer parts, computer hardware, computer hard drive and surveillance equipment etc. Material: Stainless steels SUS 301, 302, 304, 305, 304L, 420J2, 430 etc.
  • Chemical manufacturing process: valves, rings, gas absorb equipment etc. Material: Stainless Steels SUS 304, 316, 316L, 410S etc.
Product Application 2
  • Medical equipment: needles and other medical equipment. Material: Stainless Steels SUS 304 etc
  • Automobile manufacture: Automobile clutch, heat transfer and parts. Material: Stainless Steels SUS301, 304, C1100 etc.
  • Optical fiber: Optical fiber wrap. Material: Stainless Steels SUS 304, copper alloys etc.
Product Application 3
  • Industrial use rolled products:
  • Material : SUS301, 302, 304, 305, 316L, 410, 420J2, 430 :
  • Thickness: 1.2~0.01mm; Width: 450mm~2mm
產品規範
CNS JIS ASTM AISI DIN
301 SUS 301 S30100 301 1.4310
304 SUS 304 S30400 304 1.4301
304L SUS 304L S30403 304L 1.4306
316 SUS 316 S31600 316 1.4401
316L SUS 316L S31603 316L 1.4404
430 SUS 430 S43000 430 1.4016
Our Equipment
Machines Number of sets
1525mm Slitter(皮帶式壓台) 2 sets
1000mm Slitter 1 set
610mm Slitter (反張力滾壓台) 1 set
500mm Slitter (一般壓台式) 1 set
1525mm Leveler (日製NUSCO系統飛剪機) 1 set
1220mm Leveler (台製偏心停剪機) 2 set
800mm Leveler (台製偏心停剪機) 1 set
800mm Leveler (台製NUSCO系統飛剪機) 1 set
500mm Leveler (日製NUSCO系統飛剪機) 1 set
1700mm平剪機(自動設定) 4 sets
Capability
Machine Thickness Thickest Narrowness Longest Length Shortness Length Inner diameter Outer diameter M/Min Piece/Min
1525mm Slitter 0.2~3.0 1600 500 1750 130
1525mm Leveler 0.2~3.0 1600 450 6000 350 500 1750 30 45
1220mm Leveler 0.2~2.0 1350 150 3000 60 300~ 500 1800 15 57
800mm Slitter 0.15~3.0 850 60 1220 100 500 1650 20 60
500mm Leveler 0.15~1.5 550 100 1500 150 500 1900 50 120
610mm Slitter 0.1~3.0 630 400~ 500 1600 180
500mm Slitter 0.1~1.2 485 300~ 500 1300 90
1700mm Cutter 0.2~3.0 1700 1220 20 35
※ M/min = Meter per Minute ; Piece/Min = Piece per Minute
Capacity
Equipment Average number of knife Average number of production (16hr/day)
1525mm Slitter 30MT
1525mm Leveler 10,000 25MT
1220mm Leveler 69,000 15MT
800mm Leveler 76,000 15MT
500mm Leveler 125,800 20MT
620mm Slitter 15MT
500mm Slitter 5MT
1700mm Cutter 15,000 5MT
Total 295,800 130MT
Above represents the y-m-d average production of aluminum, stainless steels, tinplate products
Emergency protocol

20 percent of our production is saved for emergency response. This is to respond to scenarios such as sudden increase in demand. If needed production may be outsourced, yet will still meet our standard and clients needs. 整體產線為因應緊急狀況將預留20%產能作為緊急之 需，如果在整體產線突然暴增的情況下，將採取委外協 力廠商協助生產，為能做到品質的控管， 將以一般要求 之產品委外生產(委外生產將會派駐點人員隨同生產)。
For example:
Cooling plates and coating will be outsourced unless asked. 散熱片及烤漆用件交由處理。另高要求品質則由廠內自行生產控管。

Single day max production capacity單日最高產能

Single day max production: 173 MT.

Average single day production: 130 MT X 25 Days = monthly production: 3,250 MT

Production Flow